Services
Every scope we measure, grouped by where it sits on the job. Priced from estimating hours at our standard rate, so you can see exactly what you are paying for — and bundling scopes together costs less than buying them one at a time.
Civils & substructure 6 scopes
Demolition & site clearance
Structures to be removed, arisings, disposal volumes, asbestos provisional allowances and temporary propping.
£80.00from, ex VATGroundworks & earthworks
Excavation, cut and fill, disposal, imported fill, capping and working platforms by volume.
£98.60from, ex VATFoundations & substructure
Pads, strips, rafts, pile caps, ground beams and retaining walls: concrete, formwork and reinforcement.
£102.00from, ex VATPiling & ground improvement
Pile numbers, diameters, depths and rig moves, with testing and attendance allowances.
£80.00from, ex VATDrainage & below-ground services
Foul and surface water runs by diameter and depth, chambers, attenuation, connections and ducting.
£83.30from, ex VATCivils, highways & infrastructure
Roads, pavement build-ups, kerbs, bridges, culverts and structures measured to CESMM or NRM.
£136.00from, ex VATStructure 5 scopes
Structural steelwork
Member by member: sections, lengths, kg/m, tonnage, connections, fittings, plate and holding-down bolts.
£102.00from, ex VATConcrete frame & rebar
Concrete volumes, formwork areas and reinforcement tonnage by bar size, with mesh and accessories.
£120.70from, ex VATMasonry & blockwork
Facing brick, block, cavity walls, lintels, wall ties, DPC and movement joints by area.
£85.00from, ex VATTimber frame & carpentry
Panels, joists, trusses, studwork, sheathing and structural carpentry by linear and square metre.
£85.00from, ex VATPrecast & structural units
Planks, stairs, landings, columns and crosswall units scheduled by type, with crane and grouting allowances.
£91.80from, ex VATEnvelope 4 scopes
Roofing & waterproofing
Coverings, insulation, membranes, flashings, rainwater goods, rooflights and edge details.
£81.60from, ex VATCladding & facades
Rainscreen, composite panel, brick slip and render systems with supporting rails, cavity barriers and trims.
£119.00from, ex VATWindows, doors & curtain walling
Scheduled by type and size from the window and door schedules, with glazing specification and ironmongery.
£85.00from, ex VATSFS infills & sheathing
Light gauge infill framing, sheathing board, breather membrane and fixings by elevation.
£91.80from, ex VATArchitectural & fit-out 5 scopes
Architectural metalwork & balustrades
Stairs, balustrades, handrails, balconies, railings, gates and secondary steel by the metre and item.
£110.50from, ex VATDrylining, ceilings & partitions
Partition types by area, linings, suspended and MF ceilings, bulkheads, with fire and acoustic ratings.
£91.80from, ex VATJoinery & fit-out
Doorsets, ironmongery, kitchens, worktops, bespoke joinery and second fix, scheduled room by room.
£105.40from, ex VATFloor, wall & ceiling finishes
Screeds, tiling, resin, carpet, vinyl, plaster and decoration measured off the room data sheets.
£91.80from, ex VATExternal works & landscaping
Paving, kerbs, fencing, gates, planting, street furniture, line marking and boundary treatments.
£95.20from, ex VATBuilding services 4 scopes
Mechanical & HVAC
Ductwork, pipework, plant, AHUs, terminals, insulation and valves scheduled off the services drawings.
£132.60from, ex VATElectrical & containment
Distribution, cable, containment, small power, lighting, fire alarm and data points counted by drawing.
£132.60from, ex VATPublic health & plumbing
Sanitaryware, hot and cold services, above-ground drainage and rainwater pipework by run and item.
£102.00from, ex VATFire protection & passive fire
Sprinklers, dry risers, intumescent and board protection, fire stopping, dampers and compartment lines.
£81.60from, ex VATCommercial & engineering 8 scopes
Budget estimate & cost plan
Elemental cost plan from outline information, benchmarked against current rates, for early decisions.
£88.40from, ex VATFull bill of quantities (NRM2)
A measured, formatted bill across every trade, ready to issue to a tender list.
£187.00from, ex VATPreliminaries build-up
Site set-up, staffing, plant, welfare, scaffold and programme-driven costs, built up from your programme.
£80.00from, ex VATFull tender pricing pack
Submission-ready priced BoQ, clarifications, exclusions, programme notes and a branded quote document.
£229.50from, ex VAT3D model & IFC from drawings
Your 2D set turned into a browsable 3D model with an IFC4 export and a quantity schedule.
£204.00from, ex VATFabrication & shop drawings
General arrangements, assemblies and single-part sheets with NC/DXF files, priced per sheet.
£272.00from, ex VATValue engineering review
Specification, section and buildability alternatives with a priced saving schedule against the base design.
£110.50from, ex VATEstimate audit & second opinion
An independent check of a takeoff or estimate you already have, with a variance report.
£80.00from, ex VATWhat lands in your inbox
Measured schedule
Every member marked, with section size, length, kg/m, tonnage and connection type. Excel, so you can sort and filter it.
Priced build-up
Material, fabrication hours, coating, delivery and erection shown separately. You can see exactly what moves the number.
Marked-up drawings
Colour-coded PDFs showing what was measured and what was left out. No arguments later about scope.
Clarifications & RFIs
The questions the drawings raised, written so you can send them straight to the design team.
3D model & IFC
A browsable model of the takeoff, so the frame can be checked by eye before anyone commits a price.
Tender-ready quote
A branded document you can put your name on and return, with exclusions and programme notes already written.